Ronny Wojcik

The two main types of house paint are water-based paint, which is also called vinyl or latex paint, and oil-based paint. Modern acrylic latex paint is the best choice for exterior painting because of its durability, flexibility, and ease of use. This paint resists fading, peeling, and blistering more successfully than oil-based paints, and can expand and contract along with changing temperatures. It also dries faster, emits fewer volatile organic compounds , and is easier to clean. Summer is the ideal time to get any exterior painting projects done, with the weather dry and not too much rain around . Breaking this sprawling job into smaller, easily manageable components is the key to getting this project done efficiently. Save your favorite colors, photos, and past orders all in one place. With PaintPerks, you'll always be the first to hear about big sales and have access to everyday savings and exclusive offers. Plus, you can order your paint and supplies right from our site. When using a brush, dip it about a third of the way into the paint, tap off any excess, and apply with smooth, even strokes. Spread a layer of paint on the door parts surrounding the panels. Work quickly from one end of the door to the other so you’re always brushing back over wet paint. Turn the brush to paint the adjacent edge of the same inside corner and repeat the process. Pour about a gallon of paint into a clean five-gallon bucket and hang a roller screen into the bucket. Load the roller, rolling it against the screen until the roller nap is saturated and the excess paint squeezed out. Load the brush by dipping about two inches of the bristles into the paint. You will need to be in your home and on a mobile device with a rear-facing camera that is connected to your home’s wi-fi. Exterior house painting is the most effective way to boost the curb appeal of your house. CertaPro Painters® makes it easier than ever to give your home a complete makeover without hassle, headaches, or worries. Oil-based paint definitely needs curing time; check the manufacturer’s recommendations. Paint when temperatures are above 50 degrees Fahrenheit and below 85 degrees Fahrenheit. Heavy rain or high humidity on a newly painted, uncured surface can cause blistering. Homeowners depend on paint to both beautify and protect. If you have decided to put the power of paint to work for your home’s exterior firsthand, use these top exterior painting preparation steps to succeed. Completing a top-quality exterior paint job requires more than patience and perseverance. You’ll need a sharp eye, steady hand and a little practice to paint crisp, straight lines. In addition, you’ll need the strength to move and set up tall ladders, and the confidence to work from them. The humidity level should be in the 40% to 50% range; some humidity is necessary to help the paint dry at the proper rate. Avoid painting when the air reaches 70% humidity and above. Some paints can be applied in temperatures as low as 35 degrees Fahrenheit. Painting an entire house is a highly worthwhile, yet daunting, project. Select colors that complement the period of your home. If you only plan to paint once, consider a boom lift rental to get your project done. There’s no maintenance required, and you won’t need to store it either. Replace any large areas of wood like window sills or trim with new material. Use a wire brush or similar tool to scrape away rotted wood. If you have any inquiries about wherever and how to use our homepage, you can contact us at our own site. Be sure to dig away any and all rot until you reach wood that is sound and undisturbed by moisture. Use a random orbital sander equipped with 80-grit sandpaper to feather the edge around all areas where you scraped. Taper this edge back so that when you run your hand over it the transition feels smooth.